Products

Ground Piercing Unit UP-25.
The device is intended for piercing under the roads and other earthen mounds, as well as on horizontal sections of land with prepared pits to accommodate the unit at depths up to 4 meters.
UP-25 can be mounted on any tractor with the nominal capacity of more than 50 h/p, that is assisted with hydraulic system or unattended hydraulic station, with a maximum working pressure up to 20 MPa.
Description of products:
Length, mm, min / max - 2270/3270
Width / Height, mm - 600/850
Length of piercing – max 44 m (depending on soil)
Diameter of piercing, mm, min / max - 67/250
Piercing force / extension, kgs - max 25000
Rod length / diameter, mm - 940/48
Rod weight, kg - 12.7
Weight of unit without equipment, kg - 560
Set of unit equipment:
1. Expander / ø 120 mm – 1 pc.
2. Expander / ø 150 mm – 1 pc.
3. Expander / ø 220 mm – 1 pc.
4. Expander / ø 250 mm – 1 pc.
5. L-rod = 940 / ø 48 mm - 47 pcs.
6. Expander rod - 1 pc.
7. Piercing pick ø 67 mm. - 1pc.

Pump-mixing unit for preparation of bentonite solution for horizontal directional drilling machines.
The unit is intended for the preparation of bentonite solution and its supply to the high-pressure pump of the horizontal directional drilling machine, consuming up to 160 litters of bentonite solution per minute.
Description of products:
1. Tank working volume - 2500 litters.
2. Unit easily dissolves even sparingly soluble potassium bentonite.

Collet clamp for plastic pipes.

This is used for securing the ends of plastic pipes and clamping them into the prepared hole, made by horizontal directional drilling.

Typical dimensions of fabricated clamps for pipes with diameter 32 mm, 40 mm, 63 mm, 110 mm. It is possible the production of the other sizes by order.